The Taurus TX22 Forced Reset Device is a drop-in modification that replaces the factory disconnector in the Taurus TX22. As the slide cycles, the modified part mechanically forces the trigger forward into the reset position.

This allows faster follow-up shots while still requiring a separate trigger pull for each round. It remains a semi-automatic system.

This guide is not legal advice. Always verify federal, state, and local laws before purchasing or using any rate-enhancing device.

Available in our Forced Reset Devices™ category.

What Is the TX22 Forced Reset Device?

It is a simple disconnector replacement designed specifically for the Taurus TX22. It does not replace the entire trigger group. The device uses the rearward motion of the slide to assist the trigger reset.

How It Works

1. You pull the trigger → one round fires.
2. The slide cycles rearward.
3. The modified disconnector uses slide movement to force the trigger forward into the reset position.
4. You pull the trigger again for the next shot.

Each shot still requires a deliberate function of the trigger.

Compatibility

• Designed specifically for the Taurus TX22.
• No buffer or BCG considerations (it is a pistol, not an AR platform).
• Installation is internal to the fire control area.

Installation Overview

1. Clear the firearm and remove the magazine.
2. Field strip the TX22 per the manufacturer’s instructions to access the fire control components.
3. Remove the factory disconnector.
4. Install the Forced Reset Device disconnector.
5. Reassemble and function check thoroughly (dry fire in safe and fire modes).
6. Test fire with the correct ammunition.

Most users complete the install in under 15 minutes once familiar with the TX22 disassembly process.

Common Questions

Is it legal?
Federal status follows the same one-round-per-function-of-the-trigger principle as other Forced Reset Devices. State laws vary significantly. This is not legal advice.

Does it work with all TX22 models?
It is designed for the standard TX22. Verify fitment if you have a specialized variant.

Can it be reversed?
Yes. Reinstall the factory disconnector.

Final Thoughts

The Taurus TX22 Forced Reset Device is a straightforward way to add faster reset capability to a popular rimfire pistol. Because it only replaces the disconnector, the install is relatively simple compared to full cassette systems. Always confirm local legality before use.

Disclaimer: This article is for informational purposes only and does not constitute legal advice. Firearm laws change frequently. Verify all applicable federal, state, and local regulations before purchasing or using any Forced Reset Device. Always follow safe firearm handling practices.